A surface acoustic wave is referred to as a SAW filter, and a surface acoustic wave is an elastic wave that propagates along the surface of an object. Let's take a look at its terminology.
Let's take a look at the features of SAW Filter!
There are four kinds of RF-IF filter which may be defined. Each different kind rejects or accepts signals in a different way, and using the appropriate kind of RF filter it is possible to accept the required signals and reject the ones which aren't desired.
High Purity Quartz Materials products shall be shipped with the product coating weight.
Before using the SAW Filter, do a good job of grounding to minimize the coupling between the input and output. Otherwise, this coupling will cause the amplitude and group delay of the device to fluctuate. Note that the wave frequency is f = 1/T
SAW Resonator is a filter whereby the electrical input signal is converted to a acoustic wave by so-called interdigital transducers (IDTs) on a piezoelectric substrate like quartz.
Copyright © Hangzhou Freqcontrol Electronic Technology Ltd. All Rights Reserved | Sitemap | Powered by